TP-LINK TL-WR702N Specifications download pdf (Page 71)

TL-WR702N 150Mbps Wireless N Nano Router

- 65 -

Figure 5-15 Wireless Settings - Router

¾ SSID - Enter a string of up to 32 characters. The same name of SSID (Service Set

Identification) must be assigned to all wireless devices in your network. The default SSID is

set to be TP-LINK_XXXXXX (XXXXXX indicates the last unique six numbers of each

Router’s MAC address). But it is recommended strongly that you change your networks

name (SSID) to a different value. This value is case-sensitive. For example, TEST is NOT

the same as test.

¾ Region - Select your region from the pull-down list. This field specifies the region where the

wireless function of the Router can be used. It may be illegal to use the wireless function of

the Router in a region other than one of those specified in this field. If your country or region

is not listed, please contact your local government agency for assistance.

¾ Channel - This field determines which operating frequency will be used. The default channel

is set to Auto. It is not necessary to change the wireless channel unless you notice

interference problems with another nearby access point.

¾ Mode - Select the desired mode. The default setting is 11/jointfilesconvert/223122/bgn mixed.

• 11b only - Select if all of your wireless clients are 802.11b.

• 11g only - Select if all of your wireless clients are 802.11g.

• 11n only- Select only if all of your wireless clients are 802.11n.

• 11/jointfilesconvert/223122/bg mixed - Select if you are using both 802.11b and 802.11g wireless clients.

• 11/jointfilesconvert/223122/bgn mixed - Select if you are using a mix of 802.11b, 11g, and 11n wireless clients.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 174 175

No comments

TP-LINK TL-WR702N Specifications Page 71