TP-LINK TL-WR702N Specifications download pdf (Page 98)

TL-WR702N 150Mbps Wireless N Nano Router

- 92 -

To add static routing entries:

1. Click the Add New button.

2. Enter the following data:

¾ Destination IP Address - The Destination IP Address is the address of the network or host

that you want to assign to a static route.

¾ Subnet Mask - The Subnet Mask determines which portion of an IP Address is the network

portion, and which portion is the host portion.

¾ Gateway - This is the IP Address of the gateway device that allows for contact between the

router and the network or host.

3. Select Enabled or Disabled for this entry on the Status pull-down list.

4. Click the Save button to save it.

Figure 5-45 Add or Modify a Static Route Entry

To modify or delete an existing entry:

1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the

Delete.

2. Modify the information.

3. Click the Save button.

Click the Enable All button to make all entries enabled.

Click the Disabled All button to make all entries disabled.

Click the Delete All button to delete all entries

5.11 IP QoS

You can configure the IP QoS function on this page.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 174 175

No comments

TP-LINK TL-WR702N Specifications Page 98