TP-LINK TL-WR702N Specifications download pdf (Page 152)

TL-WR702N 150Mbps Wireless N Nano Router

- 146 -

Figure 8-8 Wireless Settings - Client

¾ SSID - Enter a string of up to 32 characters. The same name of SSID (Service Set

Identification) must be assigned to all wireless devices in your network. The default SSID is

set to be TP-LINK_XXXXXX (XXXXXX indicates the last unique six numbers of each

Router’s MAC address). But it is recommended strongly that you change your networks

name (SSID) to a different value. This value is case-sensitive. For example, TEST is NOT

the same as test.

¾ MAC of AP - The MAC address of AP that you want to access.

¾ Region - Select your region from the pull-down list. This field specifies the region where the

wireless function of the Router can be used. It may be illegal to use the wireless function of

the Router in a region other than one of those specified in this field. If your country or region

is not listed, please contact your local government agency for assistance.

¾ Survey - Click this button, you can survey the AP which runs in the current channel.

¾ Security Type - This option should be chosen according to the AP's security configuration.

It is recommended that the security type is the same as your AP's security type.

¾ WEP Key Index - This option should be chosen if the key type is WEP (ASCII) or WEP

(HEX). It indicates the index of the WEP key.

¾ Authentication Type - This option should be chosen if the key type is WEP (ASCII) or WEP

(HEX). It indicates the authorization type of the Root AP.

¾ PassWord - If the AP your Router is going to connect needs password, you need to fill the

password in this blank.

1 2 ... 147 148 149 150 151 152 153 154 155 156 157 ... 174 175

No comments

TP-LINK TL-WR702N Specifications Page 152