TP-LINK TL-WR702N Specifications download pdf (Page 84)

TL-WR702N 150Mbps Wireless N Nano Router

- 78 -

5.8.1 Virtual Servers

Choose menu “Forwarding → Virtual Servers”, and then you can view and add virtual servers

in the screen as shown in Figure 5-27. Virtual servers can be u

sed for setting up public services

on your LAN, such as DNS, Email and FTP. A virtual server is defined as a service port, and all

requests from the Internet to this service port will be redirected to the computer specified by the

server IP. Any PC that was used for a virtual server must have a static or reserved IP Address

because its IP Address may be changed when using the DHCP function.

Figure 5-27 Virtual Servers

¾ Service Port - The numbers of External Ports. You can type a service port or a range of

service ports (in XXX – YYY format, XXX is the start port number, YYY is the end port

number).

¾ IP Address - The IP Address of the PC providing the service application.

¾ Protocol - The protocol used for this application, either TCP, UDP, or All (all protocols

supported by the Router).

¾ Status - The status of this entry, either Enabled or Disabled.

To setup a virtual server entry:

1. Click the Add New… button, the next screen will pop-up as shown in Figure 5-28.

Select the service port you want to use from the Common Service Port list. If the Common

Service Port list does not have the service that you want to use, type the service port

number or service port range in the Service Port box.

3. Type the IP Address of the computer in the IP Address box.

4. Select the protocol used for this application, either TCP, UDP, or All.

5. Select the Enable to enable the virtual server.

6. Click the Save button.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 174 175

No comments

TP-LINK TL-WR702N Specifications Page 84