TP-LINK TL-WR702N Specifications download pdf (Page 134)

TL-WR702N 150Mbps Wireless N Nano Router

- 128 -

¾ Authentication Type - This option should be chosen if the key type is WEP (ASCII) or WEP

(HEX). It indicates the authorization type of the Root AP.

¾ Password - If the AP your Router is going to connect needs password, you need to fill the

password in this blank.

Be sure to click the Save button to save your settings on this page.

)

Note:

1. The operating distance or range of your wireless connection varies significantly based on the

physical placement of the Router. For best results, place your Router.

z Near the center of the area in which your wireless stations will operate.

z In an elevated location such as a high shelf.

z Away from the potential sources of interference, such as PCs, microwaves, and cordless

phones.

z Away from large metal surfaces.

2. Failure to follow these guidelines can result in significant performance degradation or inability

to wirelessly connect to the Router.

7.6.2 Wireless Security

Choose menu “Wireless → Wireless Security”, and then you can configure the security

settings of your wireless network.

There are three wireless security modes supported by the Router: WEP (Wired Equivalent

Privacy), WPA/WPA2 and WPA-PSK/WPA2-PSK.

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 174 175

No comments

TP-LINK TL-WR702N Specifications Page 134