TP-LINK TL-WR702N Specifications download pdf (Page 87)

TL-WR702N 150Mbps Wireless N Nano Router

- 81 -

5. Select Enable in Status field.

6. Click the Save button to save the new rule.

Figure 5-30 Add or Modify a Port Triggering Entry

To modify or delete an existing entry:

1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the

Delete.

2. Modify the information.

3. Click the Save button.

Click the Enable All button to make all entries enabled.

Click the Disabled All button to make all entries disabled.

Click the Delete All button to delete all entries.

)

Note:

1. When the trigger connection is released, the corresponding opening ports will be closed.

2. Each rule is allowed to be used only by one host on LAN synchronously. The trigger

connection of other hosts on LAN will be refused.

3. Incoming Port Range cannot overlap each other.

5.8.3 DMZ

Choose menu “Forwarding → DMZ”, and then you can view and configure DMZ host in the

screen as shown in Figure 5-31. The DMZ host feature allows one local ho

st to be exposed to the

Internet for a special-purpose service such as Internet gaming or videoconferencing. DMZ host

forwards all the ports at the same time. Any PC whose port is being forwarded must have its

DHCP client function disabled and should have a new static IP Address assigned to it because its

IP Address may be changed when using the DHCP function.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 174 175

No comments

TP-LINK TL-WR702N Specifications Page 87