TP-LINK TL-WR702N Specifications download pdf (Page 90)

TL-WR702N 150Mbps Wireless N Nano Router

- 84 -

¾ Enable Firewall - the general firewall switch is on or off.

¾ Enable IP Address Filtering - set IP Address Filtering is enabled or disabled. There are two

default filtering rules of IP Address Filtering, either Allow or Deny passing through the router.

¾ Enable Domain Filtering - set Domain Filtering is enabled or disabled.

¾ Enable MAC Filtering - set MAC Address Filtering is enabled or disabled. You can select the

default filtering rules of MAC Address Filtering, either Allow or Deny accessing the router.

5.9.2 IP Address Filtering

The IP address Filtering feature allows you to control Internet Access by specific users on your

LAN based on their IP addresses. The IP address filtering is set on this page:

Figure 5-35 IP address Filtering

To disable the IP Address Filtering feature, keep the default setting, Disabled. To set up an IP

Address Filtering entry, click Enable Firewall and Enable IP Address Filtering on the Firewall

page, and click the Add New… button. The page "Add or Modify an IP Address Filtering entry"

will appear shown in Figure 5-36:

Figure 5-36 Add or Modify an IP Address Filtering Entry

To create or modify an IP Address Filtering entry, please follow these instructions:

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 174 175

No comments

TP-LINK TL-WR702N Specifications Page 90