TP-LINK TL-WR702N Specifications download pdf (Page 42)

TL-WR702N 150Mbps Wireless N Nano Router

- 36 -

• Type - you can choose the type for the WEP security on the pull-down list. The default

setting is Automatic, which can select

Shared Key or Open System authentication type

automatically based on the wireless station's capability and request.

• WEP Key Format - Hexadecimal and ASCII formats are provided here. Hexadecimal

format stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified

length. ASCII format stands for any combination of keyboard characters in the specified

length.

• WEP Key (Password) - Select which of the four keys will be used and enter the matching

WEP key that you create. Make sure these values are identical on all wireless stations in

your network.

• Key Type - You can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for

encryption. "Disabled" means this WEP key entry is invalid.

64-bit -

You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is

not promoted) or 5 ASCII characters.

128-bit - You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is

not promoted) or 13 ASCII characters.

152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is

not promoted) or 16 ASCII characters.

)

Note:

If you do not set the key, the wireless security function is still disabled even if you have selected

Shared Key as Authentication Type.

¾ WPA /WPA2

• Version - you can choose the version of the WPA security from the pull-down list. The

default setting is Automatic, which can select

WPA (Wi-Fi Protected Access) or WPA2

(WPA version 2) automatically based on the wireless station's capability and request.

• Encryption - You can select Automatic, TKIP or AES.

• Radius Server IP - Enter the IP address of the Radius server.

• Radius Port - Enter the port that Radius server used.

• Radius Password - Enter the password for the Radius server.

• Group Key Update Period - Specify the group key update interval in seconds. The value

should be 30 or above. Enter 0 to disable the update.

¾ WPA-PSK/WPA2-PSK- It’s the WPA/WPA2 authentication type based on pre-shared

passphrase.

• Version - you can choose the version of the WPA-PSK security on the drop-down list. The

default setting is Automatic (Recommended), which can select

WPA-PSK (Pre-shared

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 174 175

No comments

TP-LINK TL-WR702N Specifications Page 42