TP-LINK TL-ER6120 User Manual Page 129

  • Download
  • Add to my manuals
  • Print
  • Page
    / 169
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 128
-124-
¾ Tracert
Destination IP/Domain: Enter destination IP address or Domain name here. Then select a
port for testing, if Auto is selected, the Router will select the interface
of destination automatically. After clicking the <Start> button, the
Router will send Tracert packets to test the connectivity of the
gateways during the journey from the source to destination of the
test data and the results will be displayed in the box below.
3.7.5.2 Online Detection
On this page, you can detect the WAN port is online or not.
Choose the menu MaintenanceDiagnosticsOnline Detection to load the following page.
Figure 3-87 Online Detection
The following items are displayed on this screen:
¾ General
Port: Select the port to be detected.
Detecting: Activate or inactivate Online Detection function. When Online Detection is
active, WAN status will depend on the result of both PING and DNS
Lookup. When Online Detection is inactive, WAN status will be detected
according to physical connection status and dial-up status.
Mode: Detect automatically or Manually. In Auto mode, gateway will be selected
as destination for PING detection, DNS server of WAN port will be
selected as destination for DNS Lookup. In Manual Mode, you can
configure the destination for PING and DNS Lookup manually.
Ping: Enter the destination IP for Ping in Manual mode. 0.0.0.0 means PING
detection is disabled.
Page view 128
1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 168 169

Comments to this Manuals

No comments