Tp-link 108M Wireless ADSL2+ Router TD-W8920G User Manual

TD-W8920G 108M Wireless ADSL2+ Router User Guide ¾ - Complies with ITU G.992.5 (ADSL 2+) - Annex A/B/C and Annex L (RE-DSL) ¾ - Complies with I

TD-W8920G 108M Wireless ADSL2+ Router User Guide Chapter 3. Hardware Installation Guide 3.1 The Front Panel The Router’s LEDs are located on t

TD-W8920G 108M Wireless ADSL2+ Router User Guide Off The Wireless function is disabled Slow flash The Wireless function is enabled WLAN Quick f

TD-W8920G 108M Wireless ADSL2+ Router User Guide before connecting the Router to your computer. ¾ An operating system supporting the TCP/IP prot

TD-W8920G 108M Wireless ADSL2+ Router User Guide Note: If do not follow these guidelines, there may be significant performance degradation and yo

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 3-3 14

TD-W8920G 108M Wireless ADSL2+ Router User Guide Chapter 4. Quick Installation Guide After connecting the Router to your network, you should co

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 4-2 3. On the Connection Type screen, you can select a connection type (PPPoA, PPPoE, ME

TD-W8920G 108M Wireless ADSL2+ Router User Guide Name was provided by your ISP, enter the Service Name. Click “Next” to continue. Figure 4-4 5.

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 4-6 7. Use the default setting “Enable Wireless”. Default SSID is “TP-LINK”, then click

COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other br

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 4-8 Note: The reboot process will take a while to complete, please wait before reopenin

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 4-9 2. In the Network Connections window, right-click on LAN (Local Area Connection), th

TD-W8920G 108M Wireless ADSL2+ Router User Guide Click on the Properties button. Figure 4-11 4. Select “Obtain an IP address automatically” by

TD-W8920G 108M Wireless ADSL2+ Router User Guide ¾ Now, you can run the Ping command in the command prompt to verify the network connection betw

TD-W8920G 108M Wireless ADSL2+ Router User Guide Note: The 1/2/3/4 LEDs of LAN port which you link to on the Router and LEDs on your PC's a

TD-W8920G 108M Wireless ADSL2+ Router User Guide Chapter 5. Basic Router Configuration This User Guide recommends using the “Quick Installation

TD-W8920G 108M Wireless ADSL2+ Router User Guide The first table indicates the information about the version including Software and Hardware, the

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 5-4 ¾ WAN Port Information Table: This table describes the WAN port settings and the re

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 5-5 1. Follow the instructions below to configure the ATM PVC on the screen (shown in F

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 5-6 1) Select the Connection Type and Encapsulation Mode your ISP has instructed you to

FCC STATEMENT This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 5-7 1) Enter the PPP Username and PPP Password provided by your ISP exactly, select the

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 5-8 5) Enable the IGMP Multicast and WAN Service on the screen above, if you are not sur

TD-W8920G 108M Wireless ADSL2+ Router User Guide the corresponding screen. You can refer to Chapter 4 to achieve the configuration for the connec

TD-W8920G 108M Wireless ADSL2+ Router User Guide DNS server addresses from your ISP. If you are provided static DNS server addresses, please sele

TD-W8920G 108M Wireless ADSL2+ Router User Guide the previous screen to make modifications. Figure 5-12 6) If you are sure about the configurat

TD-W8920G 108M Wireless ADSL2+ Router User Guide 1) If you want to adopt the Bridge service, you have to select the Enable Bridge Service option

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 5-15 ¾ IP Address: You can configure the Router’s IP Address and Subnet Mask for LAN In

TD-W8920G 108M Wireless ADSL2+ Router User Guide are configured to automatically obtain IP settings that are connected to the Router though the E

TD-W8920G 108M Wireless ADSL2+ Router User Guide 5.4.3.1. Virtual Servers Choose “Advanced Setup”Æ“NAT”Æ“Virtual Servers”, you can set up virtua

TD-W8920G 108M Wireless ADSL2+ Router User Guide button, then the corresponding entry will be deleted in the table. To setup a virtual server ent

Package contents The following contents should be found in your box: ¾ One TD-W8920G 108M Wireless ADSL2+ Router ¾ One DC power Adapter for TD-W892

TD-W8920G 108M Wireless ADSL2+ Router User Guide You only need to enter the Server IP Address for the Virtual Server. 5.4.3.2. Port Triggering C

TD-W8920G 108M Wireless ADSL2+ Router User Guide 1. Click the Add button (pop-up Figure 5-19), and then you will set the new Port Triggering in t

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 5-21 To add a new DMZ Host: You can enter the computer's IP address and then click

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 5-23 5.4.4.1. IP Filtering The IP address filtering feature makes it possible for admin

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 5-25 2. Enter the Filter name for the rule, it is exclusive and must be filled. 3. Sele

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 5-26 Setup an Incoming IP Filtering rule: 1. Click the Add button (pop-up Figure 5-26),

TD-W8920G 108M Wireless ADSL2+ Router User Guide Note: When you add a Incoming IP Filtering entry, you must configure at least one condition on t

TD-W8920G 108M Wireless ADSL2+ Router User Guide To setup a MAC Filtering rule: 1. Click the Add button (pop-up Figure 5-28), then you will set t

TD-W8920G 108M Wireless ADSL2+ Router User Guide To setup a Parental Control rule: 1. Click the Add button (pop-up Figure 5-30), and then you wil

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 5-32 Click the Add button, and you can configure the QoS on the next screen (shown in Fi

COMMENT Chapter 1. About This User Guide... 6 1.1 Purpose...

TD-W8920G 108M Wireless ADSL2+ Router User Guide After you specify the condition, click the Save/Apply button to save the entry. Note: A rule mus

TD-W8920G 108M Wireless ADSL2+ Router User Guide If the Enable automatic Assigned Default Gateway check-box is selected, this Router will accept

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 5-37 2. Enter the following data: ¾ Destination Network Address: The Destination Netw

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 5-38 To activate RIP for the device, select the Enabled radio-button for Global RIP Mod

TD-W8920G 108M Wireless ADSL2+ Router User Guide 5.4.7.1. DNS Server Choose “Advanced Setup”Æ“DNS”Æ“DNS Server”. You can see the DNS Server scre

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 5-41 To setup DDNS, follow these instructions: 1. Click the Add button (pop-up Figure 5-

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 5-43 You can select the modulation type, phone line pair and the capability of Bitswap o

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 5-44 Click the Add/Edit button, and then you can configure the Port Mapping in the next

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 5-45 57

TD-W8920G 108M Wireless ADSL2+ Router User Guide 5.5 Wireless LAN Configuration The menus used to configure Wireless LAN settings available in th

5.5 Wireless LAN Configuration ... 58 5.5.1 Wireless – Basic...

TD-W8920G 108M Wireless ADSL2+ Router User Guide 5.5.2 Wireless – Security Choose “Wireless”Æ”Security”, you will see the screen of Wireless-Sec

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 5-48 ¾ Encryption strength: Select the appropriate level of encryption, 64-bit, 128-bit

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 5-49 Note: We use Encryption Strength 64-bit, Current Network Key selected “1” and ent

TD-W8920G 108M Wireless ADSL2+ Router User Guide ¾ WPA Group ReKey Interval: Enter the Key Renewal period, which tells the Router how often it s

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 5-52 ¾ WPA Pre-Shared Key: Enter the key shared by the Router and your other network de

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 5-54 5.5.2.4. WPA2 To configure WPA2 settings, select the WPA2 option from the drop-dow

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 5-56 5.5.2.6. Mixed WPA2/WPA To configure Mixed WPA2/WPA settings, select the Mixed WPA

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 5-58 5.5.3 Wireless -- MAC Filter Choose “Wireless”Æ”MAC Filter”, you will see the scre

TD-W8920G 108M Wireless ADSL2+ Router User Guide Note: The form of MAC Address must be “xx:xx:xx:xx:xx:xx”, like “00:13:0A:55:FF:09”. Figure 5-6

TD-W8920G 108M Wireless ADSL2+ Router User Guide default value 2347 is recommended. If a network packet is smaller than the preset RTS threshold

TD-W8920G 108M Wireless ADSL2+ Router User Guide Chapter 1. About This User Guide 1.1 Purpose For helping user know about TD-W8920G 108M Wirel

TD-W8920G 108M Wireless ADSL2+ Router User Guide 5.6 Diagnostics Choose “Diagnostics”, you will see the Diagnostics screen. This section descri

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 5-64 5.7.1.1. Backup Choose “Management”Æ“Settings”Æ“Backup”, you can see the Backup sc

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 5-67 5.7.1.2. Update Choose “Management”Æ“Settings”Æ“Update”, you can see the Update sc

TD-W8920G 108M Wireless ADSL2+ Router User Guide 5.7.1.3. Restore Default Choose “Management”Æ“Settings”Æ“Restore Default”, you can see the Rest

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 5-71 ¾ Refresh: Click the button, the information in the table will be updated. ¾ Clos

TD-W8920G 108M Wireless ADSL2+ Router User Guide recorded in the local memory. If the selected mode is Remote, events will be sent to the specifi

TD-W8920G 108M Wireless ADSL2+ Router User Guide Note: The Connection Request User Name and Connection Request Password used for ACS log on the R

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 5-75 5.7.5.1. Services Choose “Management”Æ“Access Control”Æ“Services”, you can see the

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 5-77 To add the IP Address: 1. Click the Add button. You can add a new IP Address in the

TD-W8920G 108M Wireless ADSL2+ Router User Guide Figure 5-79 To change the password: 1. Enter the Old Password in the text box. 2. Enter the New

TD-W8920G 108M Wireless ADSL2+ Router User Guide Chapter 2. Product Overview 2.1 Overview of the Router Thank you for choosing the TD-W8920G 1

TD-W8920G 108M Wireless ADSL2+ Router User Guide To update the Router's software: 1. Download the latest software upgrade file from the TP-

TD-W8920G 108M Wireless ADSL2+ Router User Guide Chapter 6. Appendix Appendix A: Glossary 108M Super G™ WLAN Transmission Technology - 108M Su

TD-W8920G 108M Wireless ADSL2+ Router User Guide server with a fixed domain name (e.g., www.xyz.com) and a dynamic IP address. Default Gateway -

TD-W8920G 108M Wireless ADSL2+ Router User Guide IPoA (IP and ARP over ATM) - A protocol that provides extensions to the IP Group for handling IP

TD-W8920G 108M Wireless ADSL2+ Router User Guide small offices. SSID - A Service Set Identification is a thirty-two character (maximum) alphanume

TD-W8920G 108M Wireless ADSL2+ Router User Guide Appendix B: Specifications Supporting Standardsand Protocols ANSI T1.413, ITU G.992.1, ITU G.992

TD-W8920G 108M Wireless ADSL2+ Router User Guide market today, and data rates of up to 108Mbps. In dynamic 108M mode, the router can attach IEEE