Tp-link 108M Wireless ADSL2+ Router TD-W8920G User Manual download pdf (Page 60)

TD-W8920G 108M Wireless ADSL2+ Router User Guide

5.5.2 Wireless – Security

Choose “Wireless”Æ”Security”, you will see the screen of Wireless-Security settings shown as

below.

Figure 5-47

This page allows you to configure security features of the wireless LAN interface. You can set the

network authentication method, selecting data encryption, specify whether a network key is

required to authenticate to this wireless network and specify the encryption strength.

¾ Network Authentication: Select an authentication type from the drop-down list. Options

available are: Open, Shared, WPA, WPA-PSK, WPA2, WPA2-PSK, Mixed WPA2/WPA, and

Mixed WPA2/WPA-PSK.

Note:

For most users, it is recommended to use the default Wireless LAN Performance settings. Any

changes made to these settings may adversely affect your wireless network. Under certain

circumstances, changes may benefit performance. Carefully consider and evaluate any changes

to these wireless settings.

5.5.2.1. WEP Encryption

WEP is a basic encryption method offering three levels of encryption, 152-bit is stronger than

64-bit and 128-bit encryption. If you select enable from the drop-down list of WEP Encryption,

you will see the screen shown as below.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 84 85

No comments

Tp-link 108M Wireless ADSL2+ Router TD-W8920G User Manual Page 60