Tp-link 108M Wireless ADSL2+ Router TD-W8920G User Manual download pdf (Page 51)

TD-W8920G 108M Wireless ADSL2+ Router User Guide

If the Enable automatic Assigned Default Gateway check-box is selected, this Router will

accept the first received default gateway assignment from one of PPPoA, PPPoE or MER/DHCP

enabled PVC(s). If the check-box is not selected, enter the static Default Gateway IP and/or a

WAN Interface, you can leave the WAN Interface default. Then click Save/Apply button to save

it.

Note:

If changing the Automatic Assigned Default Gateway from unselected to selected, you have to

reboot the Router to get the automatically assigned default gateway.

Default Gateway IP address should be specified since MER Interface is selected when you

select the Enable automatic Assigned Default Gateway check box.

5.4.6.2. Static Route

Choose “Advanced Setup”Æ“Routing”Æ“Static Route”. You can see the Static Route screen,

this screen allows you to configure the static routes (shown in Figure 5-36). A static route is a

pre-determined path that network information must travel to reach a specific host or network.

Figure 5-36

To add static routing entries:

1. Click the Add button (pop-up Figure 5-37), and you will see the screen below (shown in

Figure 5-37).

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 84 85

No comments

Tp-link 108M Wireless ADSL2+ Router TD-W8920G User Manual Page 51