Tp-link 108M Wireless ADSL2+ Router TD-W8920G User Manual download pdf (Page 38)

TD-W8920G 108M Wireless ADSL2+ Router User Guide

5.4.3.1. Virtual Servers

Choose “Advanced Setup”Æ“NAT”Æ“Virtual Servers”, you can set up virtual servers on the

screen below (shown in Figure 5-17).

Virtual servers can be used for setting up public services on your LAN, such as DNS, Email and

FTP. A virtual server is defined as a service port, and all requests from the Internet to this service

port will be redirected to the computer specified by the server IP. Any PC that was used for a

virtual server must have a static or reserved IP Address because its IP Address may change

when using the DHCP function.

Figure 5-17

¾ Virtual Server Table: The table indicates the information about the Virtual Server entries.

 Server Name: This is the name of the Virtual Server. It is exclusive and must be filled

in.

 External Port Start: The base number of External Ports. You can type a service port or

leave it blank.

 External Port End: The end number of External Ports. You can type a service port or

leave it blank.

 Protocol: The protocol used for this application, TCP, UDP, or TCP/UDP.

 Internal Port Start: The base number of Internal Ports. You can type a service port or

leave it blank.

 Internal Port End: The end number of Internal Ports. You can type a service port or

leave it blank.

 Server IP Address: The IP Address of the PC providing the service application.

¾ Add: Click the Add button to add a new entry.

¾ Remove: Select the check box in the table (shown in Figure 5-17) and then click the Remove

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 84 85

No comments

Tp-link 108M Wireless ADSL2+ Router TD-W8920G User Manual Page 38