TP-LINK TL-ER6120 User Manual Page 19

  • Download
  • Add to my manuals
  • Print
  • Page
    / 169
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 18
-14-
Note:
1) By default, TL-ER6120 is set to work in the mode of dual WAN ports.
2) Any change to the number of WAN ports may lead to a loss of current configurations. Please be
sure to backup your configurations in advance.
3) The DMZ port will not be available if four WAN ports are enabled.
3.1.3.2 WAN1
TL-ER6120 provides the following six Internet connection types: Static IP, Dynamic IP, PPPoE/Russian
PPPoE, L2TP/Russian L2TP, PPTP/Russian PPTP and BigPond. To configure the WAN, please first
select the type of Internet connection provided by your ISP (Internet Service Provider).
Tips:
It’s allowed to set the IP addresses of multiple WAN ports within the same subnet. However, to
guarantee a normal communication, make sure that the WAN ports can access the same network,
such as Internet or a local area network.
The amount of tab pages for WAN port varies with the number of the WAN ports. For the
configurations of the other WAN ports, please refer to the instructions of WAN1.
Choose the menu NetworkWANWAN1 to load the configuration page.
1) Static IP
If a static IP address has been provided by your ISP, please choose the Static IP connection type to
configure the parameters for WAN port manually.
Figure 3-7 WAN – Static IP
Page view 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 168 169

Comments to this Manuals

No comments