TP-LINK TL-ER6120 User Manual Page 159

  • Download
  • Add to my manuals
  • Print
  • Page
    / 169
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 158
-154-
TP-LINK # sys reboot
This command will reboot system, Continue?[Y/N]
Reboot the system. Y means
YES, N means NO.
TP-LINK # sys restore
This command will restore system, Continue?[Y/N]
Restore to factory default. Y
means YES, N means NO.
TP-LINK # sys export config
Server address: [192.168.1.101]192.168.1.100
Username: [admin]ftp
Password: [admin]ftp
File name: [config.bin]
Export the configuration file.
Example: There is a FTP
server with IP address of
192.168.1.100 and both the
user name and password of
which is ftp. To save the
current configuration file with
the default name as
config.bin to this FTP server,
follow the configuration on
the left.
Try to save the configuration file < config.bin > ...
Save configuration file < config bin > succeed, file size is 7104 bytes.
Note:
FTP service is required for importing or exporting configuration files and system upgrade. The
parameter Server address is the IP address of the host to provide FTP service,
Username/Password is the Username/Password to login the FTP service and File name is the
name of the configuration file (change the file name if the configuration file with the same name is
existed).
The parameters in the brackets are default setting and you can enter the actual parameters
behind them. Press Enter key directly if there are no changes.
TL-ER6120 connects to the FTP server using port 21 by default.
Pay special attention that the specified account must be with appropriate permissions since the
functions such as export, import and firmware upgrade require read-write operation on FTP
server.
Page view 158
1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 168 169

Comments to this Manuals

No comments