TP-LINK TL-ER6120 User Manual Page 55

  • Download
  • Add to my manuals
  • Print
  • Page
    / 169
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 54
-50-
The first entry in Figure 3-30 indicates that: This is a Multi-Nets NAT entry named tplink1. The subnet
under the LAN port of the Router is 192.168.2.0/24 and this entry is activated. After the corresponding
Static Route entry is set, the hosts within this subnet can access the Internet through the Router via
NAT.
Note:
Multi-Nets NAT entry takes effect only when cooperating with the corresponding Static Route
entries.
The DMZ port will display in the drop-down list only when the DMZ port is enabled.
For detailed setting of subnet mask, please refer to the Appendix B FAQ
Application Example:
Network Requirements
The LAN subnet of TL-ER6120 is 192.168.0.0 /24, the subnet of VLAN2 under a three layer switch is
192.168.2.0 /24, while the subnet of VLAN3 is 192.168.3.0 /24. The IP of VLAN for cascading the
switch to the Router is 192.168.0.2. Now the hosts within VLAN2 and VLAN3 desire to access the
Internet.
The network topology is shown as the following:
Page view 54
1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 168 169

Comments to this Manuals

No comments