TP-LINK TL-WR940N V2 User's Guide download pdf (Page 48)

TL-WR940N/TL-WR941ND

300Mbps Wireless N Router

• Group Key Update Period - Specify the group key update interval in seconds. The value

should be 30 or above. Enter 0 to disable the update.

 WEP - It is based on the IEEE 802.11 standard. If you select this check box, you will find a

notice in red as show in

Figure 4-20.

Figure 4-20

•

Type - you can choose the type for the WEP security on the pull-down list. The default

setting is Automatic, which can select

Open System or Shared Key authentication type

automatically based on the wireless station's capability and request.

• WEP Key Format - Hexadecimal and ASCII formats are provided. Hexadecimal format

stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified length.

ASCII format stands for any combination of keyboard characters in the specified length.

• WEP Key- Select which of the four keys will be used and enter the matching WEP key that

you create. Make sure these values are identical on all wireless stations in your network.

• Key Typ

You can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for

encryption. "Disabled" means this WEP key entry is invalid.

64-bit - You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is

not promoted) or 5 ASCII characters.

128-bit - You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is

not promoted) or 13 ASCII characters.

152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is

not promoted) or 16 ASCII characters.



Note:

If you do not set the key, the wireless security function is still disabled even if you have

selected Shared Key as Authentication Type.

-39-

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 111 112

No comments

TP-LINK TL-WR940N V2 User's Guide Page 48