TP-LINK TL-WR940N V2 User's Guide download pdf (Page 45)

TL-WR940N/TL-WR941ND

300Mbps Wireless N Router

 SSID(to be bridged) - The SSID of the AP your router is going to connect to as a client.

You can also use the search function to select the SSID to join.

 BSSID(to be bridged) - The BSSID of the AP your router is going to connect to as a

client. You can also use the search function to select the BSSID to join.

 Survey - Click this button, you can search the AP which runs in the current channel.

 WDS Mode - This field determines which WDS Mode will be used. It is not necessary to

change the WDS Mode unless you notice network communication problems with root

AP. If you select Auto, then router will choose the appropriate WDS Mode automatically.

 Key type - This option should be chosen according to the AP's security configuration.It

is recommended that the security type is the same as your AP's security type

 WEP Index - This option should be chosen if the key type is WEP(ASCII) or

WEP(HEX).It indicates the index of the WEP key.

 Auth Type - This option should be chosen if the key type is WEP(ASCII) or

WEP(HEX).It indicates the authorization type of the Root AP.

 Password - If the AP your router is going to connect needs password, you need to fill

the password in this blank.

4.6.2 Wireless Security

Choose menu “Wireless

→

Wireless Security”, you can configure the security settings of your

wireless network.

There are five wireless security modes supported by the router: WEP (Wired Equivalent Privacy),

WPA (Wi-Fi Protected Access), WPA2 (Wi-Fi Protected Access 2), WPA2-PSK (Pre-Shared Key),

WPA-PSK (Pre-Shared Key).

-36-

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 111 112

No comments

TP-LINK TL-WR940N V2 User's Guide Page 45