TP-LINK TL-WR940N V2 User's Guide Page 82

  • Download
  • Add to my manuals
  • Print
  • Page
    / 112
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 81
TL-WR940N/TL-WR941ND
Subnet Mask - The Subnet Mask determines which portion of an IP address is the network
portion, and which portion is the host portion.
Gateway - This is the IP address of the gateway device that allows for contact between the
router and the network or host.
Interface - This interface tells you either the Destination IP Address is on the LAN & WLAN
(internal wired and wireless networks), or on the WAN (Internet).
4.13 Bandwidth Control
Figure 4-60
There are two submenus under the Bandwidth Control menu as shown in Figure 4-60. Click any
of them, and you will be able to configure the corresponding function. The detailed explanations
for each submenu are provided below.
4.13.1 Control Settings
Choose menu Bandwidth Control
Control Settings, you can configure the Egress
Bandwidth and Ingress Bandwidth in the next screen. Their values you configure should be less
than 100000Kbps. For optimal control of the bandwidth, please select the right Line Type and ask
your ISP for the total bandwidth of the egress and ingress.
Figure 4-61 Bandwidth Control Settings
Enable Bandwidth Control - Check this box so that the Bandwidth Control settings can
take effect.
Line Type - Select the right type for you network connection. If you dont know how to
choose, please ask your ISP for the information.
Egress Bandwidth - The upload speed through the WAN port
.
Ingress Bandwidth - The download speed through the WAN port.
-73-
Page view 81
1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 111 112

Comments to this Manuals

No comments