TP-LINK TL-WR940N V2 User's Guide download pdf (Page 58)

TL-WR940N/TL-WR941ND

300Mbps Wireless N Router

4. Select the protocol used for this application, either TCP or UDP, or All.

5. Select the Enable check box to enable the virtual server.

6. Click the Save button.

Figure 4-32 Add or Modify a Virtual Server Entry



Note:

If your computer or server has more than one type of available service, please select another

service, and enter the same IP Address for that computer or server.

To modify or delete an existing entry:

1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the

Delete.

2. Modify the information.

3. Click the Save button.

Click the Enable/ Disabled All button to make all entries enabled/ disabled.

Click the Delete All button to delete all entries.

Click the Next button to go to the next page and click the Previous button to return the previous

page.



Note:

If you set the service port of the virtual server as 80, you must set the Web management port on

System Tools –> Remote Management page to be any other value except 80 such as 8080.

Otherwise there will be a conflict to disable the virtual server.

4.8.2 Port Triggering

Choose menu “Forwarding

→

Port Triggering”, you can view and add port triggering in the next

screen (shown in

Figure 4-33). Some applications require multiple connections, like Internet

games, video conferencing, Internet calling and so on. These applications cannot work with a

-49-

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 111 112

No comments

TP-LINK TL-WR940N V2 User's Guide Page 58