TP-LINK TL-WR941ND Specifications download pdf (Page 63)

TL-WR940N/TL-WR941ND

450Mbps Wireless N Router

Figure 4-41 Local Management

By default, the radio button “All the PCs on the LAN are allowed to access the Router's

Web-Based Utility” is checked. If you want to allow PCs with specific MAC Addresses to access

the Setup page of the Router's Web-Based Utility locally from inside the network, check the radio

button “Only the PCs listed can browse the built-in web pages to perform Administrator

tasks”, and then enter each MAC Address in a separate field. The format for the MAC Address is

XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). Only the PCs with MAC address listed can

use the password to browse the built-in web pages to perform Administrator tasks while all the

others will be blocked.

After click the Add button, your PC's MAC Address will be placed in the list above.

Click the Save button to save your settings.



Note:

If your PC is blocked but you want to access the Router again, use a pin to press and hold the

WPS/RESET button on the back panel for about 5 seconds to reset the Router’s factory defaults

on the Router’s Web-Based Utility.

4.9.4 Remote Management

Choose menu “Security

→

Remote Management”, and then you can configure the Remote

Management function in the screen as shown in Figure 4-42. This feature allows you to manage

your Router from a remote location via the Internet.

Figure 4-42 Remote Management

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 107 108

No comments

TP-LINK TL-WR941ND Specifications Page 63