TP-LINK TL-WR941ND Specifications download pdf (Page 43)

TL-WR940N/TL-WR941ND

450Mbps Wireless N Router

 Enable SSID Broadcast - When wireless clients survey the local area for wireless networks

to associate with, they will detect the SSID broadcast by the Router. If you select the Enable

SSID Broadcast checkbox, the Wireless Router will broadcast its name (SSID) on the air.

 Enable WDS Bridging - Check this box to enable WDS. With this function, the Router can

bridge two or more WLANs. If this checkbox is selected, you will have to set the following

parameters as shown below. Make sure the following settings are correct.

• SSID (to be bridged) - The SSID of the AP your Router is going to connect to as a client.

You can also use the search function to select the SSID to join.

• BSSID (to be bridged) - The BSSID of the AP your Router is going to connect to as a

client. You can also use the search function to select the BSSID to join.

• Survey - Click this button, you can search the AP which runs in the current channel.

• WDS Mode - This field determines which WDS Mode will be used. It is not necessary to

change the WDS Mode unless you notice network communication problems with root AP.

If you select Auto, then Router will choose the appropriate WDS Mode automatically.

• Key type - This option should be chosen according to the AP's security configuration. It

is recommended that the security type is the same as your AP's security type

• WEP Index - This option should be chosen if the key type is WEP (ASCII) or WEP

(HEX).It indicates the index of the WEP key.

• Auth Type - This option should be chosen if the key type is WEP (ASCII) or WEP

(HEX).It indicates the authorization type of the Root AP.

• Password - If the AP your Router is going to connect needs password, you need to fill

the password in this blank.

4.6.2 Wireless Security

Choose menu “Wireless

→

Wireless Security”, and then you can configure the security settings

of your wireless network.

There are five wireless security modes supported by the Router: WPA/WPA2-Personal,

WPA/WPA2-Enterprise and WEP.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 107 108

No comments

TP-LINK TL-WR941ND Specifications Page 43