TP-LINK TL-WR941ND Specifications download pdf (Page 18)

TL-WR940N/TL-WR941ND

450Mbps Wireless N Router

Chapter 3. Quick Installation Guide

This chapter will show you how to configure the basic functions of your TL-WR941ND 450Mbps

Wireless N Router using Quick Setup Wizard within minutes.

3.1 TCP/IP Configuration

The default domain name of the TL-WR941ND 450Mbps Wireless N Router is http://tplinkwifi.net,

the default IP address is 192.168.0.1, and the default Subnet Mask is 255.255.255.0. These

values can be changed as you desire. In this guide, we all use the default values for description.

Connect the local PC to the LAN ports of the Router, and then you can configure the IP address

for your PC by following the steps below:

1) Set up the TCP/IP Protocol in "Obtain an IP address automatically" mode on your PC.

If you need instructions as to how to do this, please refer to

Appendix B: Configuring the

PC.

2) Then the built-in DHCP server will assign IP address for the PC.

Now, you can run the Ping command in the command prompt to verify the network connection

between your PC and the Router. The following example is in Windows 7 operation system.

Open a command prompt, and type ping 192.168.0.1, and then press Enter.

 If the result displayed is similar to the

Figure 3-1, it means the connection between your PC

and the Router has been established well.

Figure 3-1 Success result of Ping command

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 107 108

No comments

TP-LINK TL-WR941ND Specifications Page 18