TP-LINK TL-WDR4300 Specifications download pdf (Page 69)

TL-WDR4300 N750 Wireless Dual Band Gigabit Router

- 60 -

)

Note:

To use the DHCP server function of the Router, you must configure all computers on the LAN as

"Obtain an IP Address automatically".

4.8.2 DHCP Clients List

Choose menu “DHCP → DHCP Clients List”, you can view the information about the clients

attached to the Router in the screen as shown in Figure 4-45.

Figure 4-45 DHCP Clients List

¾ Client Name - The name of the DHCP client

¾ MAC Address - The MAC address of the DHCP client

¾ Assigned IP - The IP address that the Router has allocated to the DHCP client

¾ Lease Time - The time of the DHCP client leased. After the dynamic IP address has expired,

a new dynamic IP address will be automatically assigned to the user.

You cannot change any of the values on this page. To update this page and to show the current

attached devices, click the Refresh button.

4.8.3 Address Reservation

Choose menu “DHCP → Address Reservation”, you can view and add a reserved address for

clients via the next screen (shown in Figure 4-46). When you specify a reserved IP address for a

PC on the LAN, that PC will always receive the same IP address each time when it accesses the

DHCP server. Reserved IP addresses should be assigned to the servers that require permanent

IP settings.

Figure 4-46 Address Reservation

¾ MAC Address - The MAC address of the PC for which you want to reserve an IP address.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 134 135

No comments

TP-LINK TL-WDR4300 Specifications Page 69