TP-LINK TL-WDR4300 Specifications download pdf (Page 27)

TL-WDR4300 N750 Wireless Dual Band Gigabit Router

- 18 -

¾ Channel Width - Select any channel width from the drop-down list. The default setting

is “Auto”, which can adjust the channel width for your clients automatically.

¾ Channel - This field determines which operating frequency will be used. It is not

necessary to change the wireless channel unless you notice interference problems with

another nearby access point. If you select “Auto”, then the AP will select the best

channel automatically.

¾ Wireless Security

z Disable Security - The wireless security function can be enabled or disabled. If

disabled, the wireless stations will be able to connect the Router without

encryption.

z Enable Security (WPA-PSK/WPA2-PSK) – It’s selected by default, with the

default PSK password the same as the default PIN code.

z No Change - If you chose this option, wireless security configuration will not

change!

These settings are only for basic wireless parameters. For advanced settings, please refer to

4.7 Wireless 5GHz

8. Then you will see the Finish page.

¾ If you don’t make any change on the Wireless page, you will see the Finish page as

shown in Figure 3-14. Click the Finish button to finish the Quick Setup.

Figure 3-14 Quick Setup - Finish

¾ If there is anything changed on the Wireless page, you will see the Finish page as

shown in Figure 3-15. Click the Reboot button to make your wireless configuration take

effect and finish the Quick Setup.

Figure 3-15 Quick Setup – Finish

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 134 135

No comments

TP-LINK TL-WDR4300 Specifications Page 27