TL-WDR4300 N750 Wireless Dual Band Gigabit Router
- 25 -
ou have configured the system time on “System Tools → Time Settings” page,
¾ ect button to connect/disconnect
ton to disconnect
Cau es the connection cannot be terminated although you specify a time to Max Idle
the page
)
Note:
Only when y
will the Time-based Connecting function can take effect.
Connect Manually - You can click the Connect/Disconn
immediately. This mode also supports the Max Idle Time function as Connect on Demand
mode. The Internet connection can be disconnected automatically after a specified inactivity
period and re-established when you attempt to access the Internet again.
Click the Connect button to connect immediately. Click the Disconnect but
immediately.
tion: Sometim
Time because some applications are visiting the Internet continually in the background.
If you want to do some advanced configurations, please click the Advanced button, and
shown in Figure 4-6 will then appear:
Figure 4-6 PPPoE Advanced Settings
¾ MTU Size - The defau is usually fine. It is not
e should
If your ISP does not automatically assign IP addresses to the
lt MTU size is “1480” bytes, which
recommended that you change the default MTU Size unless required by your ISP.
¾ Service Name/AC Name - The service name and AC (Access Concentrator) nam
not be configured unless you are sure it is necessary for your ISP.
In most cases, leaving
these fields blank will work.
¾ ISP Specified IP Address -
Router during login, please click “Use IP address specified by ISP” check box and enter the
IP address provided by your ISP in dotted-decimal notation.
Comments to this Manuals