TP-LINK TL-WDR4300 Specifications download pdf (Page 48)

TL-WDR4300 N750 Wireless Dual Band Gigabit Router

- 39 -

III. Enter the Router’s PIN on your client device

Use this method if your client device asks for the Router’s PIN number.

Step 1: On the client device, enter the PIN number listed on the Router’s Wi-Fi Protected Setup

screen, shown in Figure 4-16 (It is also labeled on the bottom of the Router).

Step 2: The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected

Setup process.

Step 3: When the WPS LED is on, the client device has successfully connected to the Router.

Step 4: Refer back to your client device or its documentation for further instructions.

)

Note:

1) The WPS LED on the Router will light green for five minutes if the device has been

successfully added to the network.

2) The WPS function cannot be configured if the Wireless Function of the Router is disabled.

Please make sure the Wireless Function is enabled before configuring the WPS.

4.6.3 Wireless Security

Choose menu “Wireless 2.4GHz → Wireless Security”, you can configure the security settings

of your wireless network.

There are five wireless security modes supported by the Router: WPA-Personal, WPA2-Personal,

WPA-Enterprise, WPA2-Enterprise, and WEP.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 134 135

No comments

TP-LINK TL-WDR4300 Specifications Page 48