TP-LINK TL-R402M User Manual download pdf (Page 35)

TL-R402M Cable/DSL Router User Guide

5.7.1 Firewall

Using the Firewall page (shown in Figure 5-20), you can turn the general firewall switch on or off.

The default setting for the switch is off. If the general firewall switch is off, even if IP Address

Filtering, DNS Filtering and MAC Filtering are enabled, their settings are ineffective.

Figure 5-20 Firewall Settings

¾ Enable Firewall - The general firewall switch is on or off

¾ Enable IP Address Filtering - Set IP Address Filtering is enabled or disabled. There are

two default filtering rules of IP Address Filtering, either Allow or Deny passing through the

router

¾ Enable Domain Filtering - Set Domain Filtering as enabled or disabled

¾ Enable MAC Filtering - Set MAC Address Filtering is enabled or disabled. You can select

the default filtering rules of MAC Address Filtering, either Allow or Deny accessing the router

5.7.2 IP Address Filtering

The IP Address Filtering feature allows you to control Internet Access by specific users on your

LAN based on their IP addresses. The IP Address Filtering is set on this page,

Figure 5-21:

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 55 56

No comments

TP-LINK TL-R402M User Manual Page 35