TP-LINK TL-R402M User Manual download pdf (Page 34)

TL-R402M Cable/DSL Router User Guide

5.6.4 UPnP

The Universal Plug and Play (UPnP) feature allows the devices, such as Internet computers, to

access the local host resources or devices as needed. UPnP devices can be automatically

discovered by the UPnP service application on the LAN. You can configure UPnP on this page

shown in

Figure 5-18:

Figure 5-18 UPnP Settings

¾ Enable UPnP - UPnP can be enabled or disabled by clicking the Enable or Disable button.

As allowing this may present a risk to security, this feature is disabled by default

¾ Current UPnP Settings Table - this table displays the current UPnP information

¾ App Description - The description provided by the application in the UPnP request

¾ External Port - External port, which the router opened for the application

¾ Protocol - Which type of protocol is opened

¾ Internal Port - Internal port, which the router opened for local host

¾ IP Address - The UPnP device that is currently accessing the router

¾ Status - Either Enabled or Disabled, “Enabled” means that port is still active, otherwise, the

port is inactive

Click Refresh to update the Current UPnP Settings List.

5.7 Security

- Security

y Firewall

y IP Filter

y Domain Filter

y MAC

y Remote

Management

y Ping from WAN

Figure 5-19 The Security menu

There are six submenus under the Security menu (shown in

Figure 5-19): Firewall, IP Address

Filtering, Domain Filtering, MAC Filtering, Remote Management and Ping from WAN. Click

any of them, and you will be able to configure the corresponding function. The detailed

explanations for each submenu are provided below.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 55 56

No comments

TP-LINK TL-R402M User Manual Page 34