TP-LINK TL-R402M User Manual download pdf (Page 25)

TL-R402M Cable/DSL Router User Guide

Figure 5-8 WAN – L2TP

For more details, please refer to your ISP.

¾ User Name/Password - Enter the User Name and Password provided by your ISP. These

fields are case-sensitive

¾ Connect/Disconnect - Click the button, you can handle the on-line connection or

disconnection

¾ Dynamic IP/Static IP - Enter the IP address in dotted-decimal notation provided by your ISP

¾ Server IP Address/Name - Please type the correct Server IP Address/Name which your

ISP provided

¾ MTU Size (in bytes) - The default value is 1460, which is usually fine. For some ISPs, you

need modify the MTU. This should not be done unless you are sure it is necessary for your

ISP

¾ Max Idle Time - If you want your Internet connection to remain active at all times, enter 0 in

the Max Idle Time field. Otherwise, enter the number of minutes you want to have elapsed

before your Internet connection terminates. (This setting is available just for “Connect on

demand” and “Connect Manually”)

¾ Connect on demand - You can configure the router to disconnect your Internet connection

after a specified period of the Internet connectivity (Max Idle Time). If your Internet

connection has been terminated due to inactivity, Connect on Demand enables the router

to automatically re-establish your connection as soon as you attempt to access the Internet

again. If you wish to activate Connect on Demand, click the radio button. If you want your

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 55 56

No comments

TP-LINK TL-R402M User Manual Page 25