TP-LINK TL-MR3040 V2 User's Guide download pdf (Page 77)

TL-MR3040 Portable Battery Powered 3G/4G Wireless N Router

-66-

Figure 4-49 Local Management

By default, the radio button “All the PCs on the LAN are allowed to access the Router's

Web-Based Utility” is checked. If you want to allow PCs with specific MAC Addresses to

access the Setup page of the router's Web-Based Utility locally from inside the network, check

the radio button “Only the PCs listed can browse the built-in web pages to perform

Administrator tasks”, and then enter each MAC Address in a separate field. The format for the

MAC Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). Only the PCs with MAC

address listed can use the password to browse the built-in web pages to perform Administrator

tasks while all the others will be blocked.

After click the Add button, your PC's MAC Address will be placed in the list above.

Click the Save button to save your settings.

)

Note:

If your PC is blocked but you want to access the router again, use a pin to press and hold the

Reset Button (hole) on the back panel for about 5 seconds to reset the router’s factory

defaults on the router’s Web-Based Utility.

4.9.4 Remote Management

Choose menu “Security → Remote Management”, you can configure the Remote

Management function in the screen as shown in Figure 4-50. This feature allows you to manage

your r

outer from a remote location via the Internet.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 240 241

No comments

TP-LINK TL-MR3040 V2 User's Guide Page 77