TP-LINK TL-MR3040 V2 User's Guide Page 215

  • Download
  • Add to my manuals
  • Print
  • Page
    / 241
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 214
TL-MR3040 Portable Battery Powered 3G/4G Wireless N Router
-204-
field blank.
¾ Primary DNS (optional) - Enter the DNS IP address provided by your ISP. Consult your ISP
if you don’t know the DNS value. The factory default setting is 0.0.0.0.
¾ Secondary DNS (optional) - Enter the IP address of another DNS server if your ISP
provides two DNS servers. The factory default setting is 0.0.0.0.
Click Save to save the changes.
)
)
Note:
1) When the device is working on Dynamic IP mode, the DHCP Server function will be
disabled.
2) To use the DHCP server function of the device, you should configure all computers in the
LAN as "Obtain an IP Address automatically" mode. This function will not take effect until
the device reboots.
6.7.2 DHCP Clients List
Selecting DHCP > DHCP Clients List will enable you to view the Client Name, MAC Address,
Assigned IP and Lease Time for each DHCP Client attached to the device (Figure 6-23).
Figure 6-23 DHCP Clients List
¾ ID - Here displays the index of the DHCP client.
¾ Client Name - Here displays the name of the DHCP client.
¾ MAC Address - Here displays the MAC address of the DHCP client.
¾ Assigned IP - Here displays the IP address that the AP has allocated to the DHCP client.
¾ Lease Time - Here displays the time of the DHCP client leased. Before the time is up, DHCP
client will request to renew the lease automatically.
You cannot change any of the values on this page. To update this page and to show the current
attached devices, click on the Refresh button.
6.7.3 Address Reservation
Selecting DHCP > Address Reservation will enable you to specify a reserved IP address for a
PC on the LAN, so the PC will always obtain the same IP address each time when it accesses
Page view 214
1 2 ... 210 211 212 213 214 215 216 217 218 219 220 ... 240 241

Comments to this Manuals

No comments