TP-LINK TL-MR3040 V2 User's Guide Page 75

  • Download
  • Add to my manuals
  • Print
  • Page
    / 241
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 74
TL-MR3040 Portable Battery Powered 3G/4G Wireless N Router
-64-
customized Network Address Translation (NAT) traversal filters to be plugged into the
gateway to support address and port translation for certain application layer "control/data"
protocols such as FTP, TFTP, H323, RTSP etc.
z FTP ALG - Select Enable, to allow FTP servers to operate properly.
z TFTP ALG - Select Enable, to allow TFTP servers to operate properly.
z H323 ALG - Select Enable, to allow H323 services to operate properly.
z RTSP ALG - Select Enable, to allow RTSP services to operate properly.
Click the Save button to save your settings.
4.9.2 Advanced Security
Choose menu “Security Advanced Security”, you can protect the router from being
attacked by TCP-SYN Flood, UDP Flood and ICMP-Flood in the screen as shown in Figure
4-48.
Figure 4-48 Advanced Security
¾ Packets Statistics Interval (5~60) - The default value is 10. Select a value between 5
and 60 seconds from the drop-down list. The Packets Statistics Interval value indicates
the time section of the packets statistics. The result of the statistics is used for analysis by
SYN Flood, UDP Flood and ICMP-Flood.
¾ DoS Protection - Denial of Service protection. Check the Enable or Disable button to
enable or disable the DoS protection function. Only when it is enabled, will the flood filters
be enabled.
Page view 74
1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 240 241

Comments to this Manuals

No comments