TP-LINK TL-MR3040 Specifications download pdf (Page 47)

TL-MR3040 Portable 3G/3.75G Battery Powered Wireless N Router

¾ Time-based Connecting - The connection will only be established in the period from the

start time to the end time (both are in HH:MM format).

)

Note:

Only when you have configured the system time on System Tools -> Time page, will the

Time-based Connecting function can take effect.

¾ Connect Manually - You can click the Connect/ Disconnect button to connect/disconnect

immediately. This mode also supports the Max Idle Time function as Connect on Demand

mode. The Internet connection can be disconnected automatically after a specified inactivity

period and re-established when you attempt to access the Internet again.

Caution: Sometimes the connection cannot be terminated although you specify a time to Max

Idle Time, since some applications are visiting the Internet continually in the background.

If you want to do some advanced configurations, please click the Advanced button, and the

page shown in Figure 4-15 will then appear:

Figure 4-15 PPPoE Advanced Settings

¾ MTU Size - The default MTU size is “1480” bytes, which is usually fine. It is not

recommended that you change the default MTU Size unless required by your ISP.

¾ Service Name/AC Name - The service name and AC (Access Concentrator) name, which

should not be configured unless you are sure it is necessary for your ISP.

In most cases,

leaving these fields blank will work.

¾ ISP Specified IP Address - If your ISP does not automatically assign IP addresses to the

Router during login, please click “Use IP address specified by ISP” check box and enter

the IP address provided by your ISP in dotted-decimal notation.

-37-

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 241 242

No comments

TP-LINK TL-MR3040 Specifications Page 47