TP-LINK TL-MR3040 Specifications Page 221

  • Download
  • Add to my manuals
  • Print
  • Page
    / 242
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 220
TL-MR3040 Portable 3G/3.75G Battery Powered Wireless N Router
) Note:
1) New firmware versions are posted at http://www.tp-link.com and can be downloaded for free.
There is no need to upgrade the firmware unless the new firmware has a new feature you
want to use. However, when experiencing problems caused by the Router rather than the
configuration, you can try to upgrade the firmware.
2) When you upgrade the Router's firmware, you may lose its current configurations, so before
upgrading the firmware please write down some of your customized settings to avoid losing
important settings.
3) Do not turn off the Router or press the Reset button while the firmware is being upgraded.
Loss of power during the upgrade could damage the Router.
4) The firmware version must correspond to the hardware.
5) The upgrade process takes a few moments and the Router restarts automatically when the
upgrade is complete.
6.8.4 Factory Defaults
Choose menu “System Tools Factory Defaults”, and then and you can restore the
configurations of the Router to factory defaults on the following screen
Figure 6-28 Restore Factory Default
Click the Restore button to reset all configuration settings to their default values.
The default User Name: admin
The default Password: admin
The default IP Address: 192.168.0.1
The default Subnet Mask: 255.255.255.0
) Note:
All changed settings will be lost when defaults are restored.
6.8.5 Backup & Restore
Choose menu “System Tools Backup & Restore”, and then you can save the current
configuration of the Router as a backup file and restore the configuration via a backup file as
shown in Figure 6-29.
-211-
Page view 220
1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 241 242

Comments to this Manuals

No comments