TP-LINK TL-MR3040 Specifications download pdf (Page 209)

TL-MR3040 Portable 3G/3.75G Battery Powered Wireless N Router

¾ Wireless MAC Filtering - Click the Enable button to enable the Wireless MAC Address

Filtering. The default setting is disabled.

To Add a Wireless MAC Address filtering entry, click the Add New… button. The “Add or Modify

Wireless MAC Address Filtering entry" page will appear, shown in Figure 6-15

Figure 6-15 Add or Modify Wireless MAC Address Filtering entry

¾ MAC Address - Enter the wireless station's MAC address that you want to control.

¾ Description - Give a simple description of the wireless station.

¾ Status - Select a status for this entry, either Enabled or Disabled.

To set up an entry, follow these instructions:

First, you must decide whether the unspecified wireless stations can access the device or not. If

you desire that the unspecified wireless stations can access the device, please select the radio

button Allow the stations not specified by any enabled entries in the list to access,

otherwise, select the radio button Deny the stations not specified by any enabled entries in

the list to access.

To add a MAC Address Filtering entry, follow these instructions:

1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC

Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example:

00-0A-EB-B0-00-0B.

2. Enter a simple description of the wireless station in the Description field. For example:

Wireless station A.

3. Select Enabled or Disabled for this entry on the Status pull-down list.

4. Click the Save button to save this entry.

To add additional entries, repeat steps 1-4.

To modify or delete an existing entry:

-199-

1 2 ... 204 205 206 207 208 209 210 211 212 213 214 ... 241 242

No comments

TP-LINK TL-MR3040 Specifications Page 209