TP-LINK 54Mbps User Manual download pdf (Page 28)

TL-WA501G 54M Wireless Access Point User Guide

Key field and select Enabled in the Status pull-down list. Click the Save and the

Return button.

The filtering rules that configured should be similar to the following list:

Figure 5-15: The filtering list

Note:

a) If you select the radio button Allow the stations not specified by any enabled

entries in the list to access for Filtering Rules, the wireless station B will still

not be able to access the AP, however, other wireless stations that are not in

the list will be able to access the AP.

b) If you enable the function and select the Deny the stations not specified by

any enabled entries in the list to access for Filtering Rules, and there are

not any enable entries in the list, thus, no wireless stations can access the AP.

5.4.5 Wireless Statistics

This page shows MAC Address, Current Status, Received Packets and Sent Packets

for each connected wireless station

Figure 5-16: The AP attached wireless stations

¾ MAC Address - The connected wireless station's MAC address

¾ Current Status - The connected wireless station's running status, one of

STA-AUTH / STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK

/ AP-UP / AP-DOWN / Disconnected

¾ Received Packets - packets received by the station

¾ Sent Packets - packets sent by the station

You cannot change any of the values on this page. To update this page and to show the

current connected wireless stations, click on the Refresh button.

If the numbers of connected wireless stations go beyond one page, click the Next

button to go to the next page and click the Previous button to return the previous page.

Note: This page will be refreshed automatically every 5 seconds.

- 23 -

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 44 45

No comments

TP-LINK 54Mbps User Manual Page 28