TP-LINK 54Mbps User Manual download pdf (Page 17)

TL-WA501G 54M Wireless Access Point User Guide

¾ MAC Address - the physical address of the AP, as seen from the LAN. The value

can't be changed.

¾ IP Address - Enter the IP address of your AP in dotted-decimal notation (factory

default: 192.168.1.1).

¾ Subnet Mask - An address code that determines the size of the network. Normally

use 255.255.255.0 as the subnet mask.

Note:

a. If you change the IP Address, you must use the new IP Address to login the AP.

b. If the new LAN IP Address you set is not in the same subnet, the IP Address pool in

the DHCP sever will not take effect, until they are re-configured.

5.4 Wireless

Figure 5-5: Wireless menu

There are four submenus under the Wireless menu (shown in figure 5-5): Basic

Settings, Security Settings, MAC Filtering and Wireless Statistics. Click any of them,

and you will be able to configure the corresponding function. The detailed explanations

for each submenu are provided below.

5.4.1 Basic Settings

The basic settings for the wireless network are set on this page, figure 5-6a:

- 12 -

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 44 45

No comments

TP-LINK 54Mbps User Manual Page 17