TP-LINK T3700G-28TQ User's Guide download pdf (Page 304)

100

101

T3700G-28TQ

JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide

285

Chapter 34 DHCP Server

DHCP (Dynamic Host Configuration Protocol) is a network configuration protocol for hosts on

TCP/IP networks, and it provides a framework for distributing configuration information to hosts.

DHCP server assigns IP addresses from specified address pools on a switch or router to DHCP

clients and manages them.

service dhcp

Description

The service dhcp command is used to enable DHCP service globally, including

DHCP Server and DHCP Relay function. To disable DHCP service, please use

no service dhcp command.

Syntax

service dhcp

no service dhcp

Command Mode

Global Configuration Mode

Example

Enable DHCP service globally:

T3700G-28TQ(config)# service dhcp

ip dhcp server exclude-address

Description

The ip dhcp server exclude-address command is used to specify the reserved

IP addresses which are forbidden to allocate, such as the gateway address, the

network segment broadcast address, the server address etc. To delete the

reserved IP addresses, please use no ip dhcp server exclude-address

command.

Syntax

ip dhcp server exclude-address start-ip-address end-ip-address

no ip dhcp server exclude-address start-ip-addr end-ip-address

Parameter

start-ip-address —— Specify the start IP address of the reserved IP pool.

1 2 ... 299 300 301 302 303 304 305 306 307 308 309 ... 407 408

Comments to this Manuals

No comments

TP-LINK T3700G-28TQ User's Guide Page 304

Comments to this Manuals

Related products and manuals for Networking TP-LINK T3700G-28TQ