TP-LINK T3700G-28TQ User's Guide download pdf (Page 116)

100

101

T3700G-28TQ

JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide

Chapter 15 IP Verify Source Commands

IP Verify Source is to filter the IP packets based on the IP-MAC Binding entries. Only the packets

matched to the IP-MAC Binding rules can be processed, which can enhance the bandwidth utility.

ip verify source

Description

The ip verify source command is used to configure the IP Verify Source mode

for a specified port. To disable the IP Verify Source function, please use no ip

verify source command.

Syntax

ip verify source {sip | sip+mac}

no ip verify source

Parameter

sip | sip+mac—— Security type. “sip” indicates that only the packets with its

source IP address and port number matched to the IP-MAC binding rules can be

processed. “sip+mac” indicates that only the packets with its source IP address,

source MAC address and port number matched to the IP-MAC binding rules can

be processed.

Command Mode

Interface Configuration Mode (interface fastEthernet / interface range

fastEthernet / interface gigabitEthernet / interface range gigabitEthernet /

interface ten-gigabitEthernet / interface range ten-gigabitEthernet)

Example

Enable the IP Verify Source function for Gigabit Ethernet ports 5-10. Configure

that only the packets with its source IP address, source MAC address and port

number matched to the IP-MAC binding rules can be processed:

T3700G-28TQ(config)#interface range gigabitEthernet 1/0/5-10

T3700G-28TQ(config-if-range)#ip verify source sip+mac

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 407 408

Comments to this Manuals

No comments

TP-LINK T3700G-28TQ User's Guide Page 116

Comments to this Manuals

Related products and manuals for Networking TP-LINK T3700G-28TQ