TP-LINK T3700G-28TQ User's Guide download pdf (Page 190)

100

101

T3700G-28TQ

JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide

171

duplex

Description

The duplex command is used to configure the Duplex Mode for an Ethernet

port. To return to the default configuration, please use no duplex command.

Syntax

duplex { auto | full | half }

no duplex

Parameter

full | half —— The duplex mode of the Ethernet port. There are three options:

auto-negotiation mode, full-duplex mode and half-duplex mode. By default the

Gigabit Ethernet port is auto-negotiation mode and the Ten Gigabit Ethernet port

is full-dulplex mode.

Command Mode

Interface Configuration Mode (interface fastEthernet / interface range

fastEthernet / interface gigabitEthernet / interface range gigabitEthernet /

interface ten-gigabitEthernet / interface range ten-gigabitEthernet)

Example

Configure the Duplex Mode as full-duplex for Gigabit Ethernet port 1/0/20:

T3700G-28TQ(config)#interface gigabitEthernet 1/0/20

T3700G-28TQ(config-if)#duplex full

speed

Description

The speed command is used to configure the Speed Mode for an Ethernet port.

To return to the default configuration, please use no speed command.

Syntax

speed { 10 | 100 | 1000 | 10000 | auto }

no speed

1 2 ... 185 186 187 188 189 190 191 192 193 194 195 ... 407 408

Comments to this Manuals

No comments

TP-LINK T3700G-28TQ User's Guide Page 190

Comments to this Manuals

Related products and manuals for Networking TP-LINK T3700G-28TQ