Tp-link TL-WR941ND User Manual download pdf (Page 45)

TL-WR941N/TL-WR941ND Wireless N Router

-38-

• Radius Server IP - Enter the IP address of the Radius Server.

• Radius Port - Enter the port that radius service used.

• Radius Password - Enter the password for the Radius Server.

• Group Key Update Period - Specify the group key update interval in seconds. The value

should be 30 or above. Enter 0 to disable the update.

¾ WPA-PSK/WPA2-PSK - It’s the WPA/WPA2 authentication type based on pre-shared

passphrase.

• Version - you can choose the version of the WPA-PSK security on the drop-down list. The

default setting is Automatic, which can select

WPA-PSK (Pre-shared key of WPA) or

WPA2-PSK (Pre-shared key of WPA) automatically based on the wireless station's

capability and request.

• Encryption - When WPA-PSK or WPA is set as the Authentication Type, you can select

either Automatic, or TKIP or AES as Encryption.

)

Note:

If you check the WPA-PSK/WPA2-PSK radio button and choose TKIP encryption, you will

find a notice in red as shown in Figure 4-19.

Figure 4-19

•

PSK Passphrase - You can enter ASCII characters between 8 and 63 characters or 8 to

64 Hexadecimal characters.

• Group Key Update Period - Specify the group key update interval in seconds. The value

should be 30 or above. Enter 0 to disable the update.

Be sure to click the Save button to save your settings on this page.

4.6.3 Wireless MAC Filtering

Choose menu “Wireless→MAC Filtering”, you can control the wireless access by configuring the

Wireless MAC Address Filtering function, shown in

Figure 4-20.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 105 106

No comments

Tp-link TL-WR941ND User Manual Page 45