TP-LINK TL-WR743ND V2 User's Guide download pdf (Page 66)

TL-WR743ND 150Mbps Wireless AP/Client Router

- 57 -

 MAC Address - The physical address of the LAN ports, as seen from the LAN. The value

can't be changed.

 IP Address - Enter the IP address of your Router in dotted-decimal notation (factory default:

192.168.0.1).

 Subnet Mask - An address code that determines the size of the network. Normally use

255.255.255.0 as the subnet mask.



Note:

1. If you change the IP Address of LAN, you must use the new IP Address to login to the Router.

2. If the new LAN IP Address you set is not in the same subnet with the previous one, the IP

Address pool in the DHCP server will be configured automatically，while the Virtual Server and

DMZ Host will not take effect until they are re-configured.

4.7 Wireless

Figure 4-16 Wireless menu

There are five submenus under the Wireless menu (shown in Figure 4-16): Wireless Settings,

Wireless Security, Wireless MAC Filtering, Wireless Advanced and Wireless Statistics. Click

any of them, and you will be able to configure the corresponding function.

4.7.1 Wireless Settings

Choose menu “Wireless → Wireless Settings”, and then you can configure the basic settings

for the wireless network on this page.

4.7.1.1 Wireless Settings in Client Router Mode

If y

ou select Client Router mode in Figure 3-6 or Client Router mode in Figure 4-5, the Wireless

Settings p

age will display as Figure 4-17.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 144 145

No comments

TP-LINK TL-WR743ND V2 User's Guide Page 66