TP-LINK TL-WR743ND V2 User's Guide Page 114

  • Download
  • Add to my manuals
  • Print
  • Page
    / 145
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 113
TL-WR743ND 150Mbps Wireless AP/Client Router
- 105 -
Subnet Mask - The Subnet Mask determines which portion of an IP address is the network
portion, and which portion is the host portion.
Gateway - This is the IP address of the gateway device that allows for contact between the
Router and the network or host.
Interface - This interface tells you either the Destination IP Address is on the LAN & WLAN
(internal wired and wireless networks), or on the WAN (Internet).
4.14 Bandwidth Control
Figure 4-67
There are two submenus under the Bandwidth Control menu as shown in Figure 4-67: Control
Settings and Rules List. Click any of them, and you will be able to configure the corresponding
function. The detailed explanations for each submenu are provided below.
4.14.1 Control Settings
Choose menu “Bandwidth Control Control Settings”, and then you can configure the
Egress Bandwidth and Ingress Bandwidth in the next screen. Their values should be configured
less than 1000000Kbps.
Figure 4-68 Bandwidth Control Settings
Enable Bandwidth Control - If this option is checked, the Bandwidth Control rules will take
effect.
Egress Bandwidth - The upload speed through the WAN port.
Ingress Bandwidth - The download speed through the WAN port.
Page view 113
1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 144 145

Comments to this Manuals

No comments