TP-LINK TL-WR743ND V2 User's Guide download pdf (Page 37)

TL-WR743ND 150Mbps Wireless AP/Client Router

- 28 -

 Channel - This field determines which operating frequency will be used. The default channel

is set to 6. It is not necessary to change the wireless channel unless you notice interference

problems with another nearby access point.

 Wireless Security Mode - You can select one of the following security options:

 Most Secure(WPA/WPA2-PSK) - Select WPA based on pre-shared passphrase.

 Secure（WEP）- Select WEP based on none pre-shared passphrase.

 No Security - The wireless security function is disabled. The wireless stations will

be able to connect the Device without encryption.

 Wireless Password - Enter an 8 to 63 character alphanumeric pass-phrase. For good

security it should be of enough length and should not be a commonly known phrase.

These settings are only for basic wireless parameters. For advanced settings, please refer to

Section 4.7 Wireless.

Click Survey button on the Wireless Bridge Setting page as shown in Figure 3-26, and then AP

List

page will appear as shown in Figure 3-27. Find the SSID of the Access Point you want to

access, and click Conne

ct in the corresponding row. For example, the first item is selected. The

target network’s SSID will be automatically filled into the corresponding box which is shown as the

Figure 3-28.

Figure 3-27 AP List

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 144 145

No comments

TP-LINK TL-WR743ND V2 User's Guide Page 37