Tp-link Cable/DSL Router TL-R860 User Manual download pdf (Page 55)

TL-R860 Cable/DSL Router User Guide

- 49 -

)

Note:

Your opposite side should call your WAN IP, which is displayed on the “Status”

page.

4) How to enable DMZ Host: Login to the router, click the “Forwarding” menu on

the left of your browser, and click " DMZ" submenu. On the "DMZ" page, click

“Enable” radio and type your IP address into the “DMZ Host IP Address” field,

using 192.168.1.169 as an example, remember to click the "Save” button.

Figure A-6 DMZ

4. I want to build a WEB Server on the LAN, what should I do?

1) Because the WEB Server port 80 will interfere with the WEB management port

80 on the router, you must change the WEB management port number to avoid

interference.

2) To change the WEB management port number: Login to the router, click the

“Security” menu on the left of your browser, and click "Remote Management"

submenu. On the "Remote Management" page, type a port number except 80,

such as 88, into the "Web Management Port" field. Click “Save” and reboot the

router.

Figure A-7 Remote Management

)

Note:

If the above configuration takes effect, to configure to the router by typing

http://192.168.1.1:88 (the router’s LAN IP address: Web Management Port) in

the address field of the web browser.

3) Login to the router, click the “Forwarding” menu on the left of your browser, and

click the "Virtual Servers" submenu. On the "Virtual Server" page, enter “80”

into the blank below the “Service Port”, and your IP address below the IP

Address, assuming 192.168.1.188 for an example, remember to “Enable” and

“Save”.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 61 62

No comments

Tp-link Cable/DSL Router TL-R860 User Manual Page 55