Tp-link Cable/DSL Router TL-R860 User Manual download pdf (Page 25)

TL-R860 Cable/DSL Router User Guide

- 19 -

¾ Default Domain - (Optional.) Input the domain name of your network.

¾ Primary DNS - (Optional.) Input the DNS IP address provided by your ISP. Or

consult your ISP.

¾ Secondary DNS - (Optional.) Input the IP address of another DNS server if your

ISP provides two DNS servers.

)

Note:

To use the DHCP server function of the router, you must configure all computers on the

LAN as "Obtain an IP Address automatically" mode. This function will take effect until the

router reboots.

4.5.2 DHCP Clients List

This page shows Client Name, MAC Address, Assigned IP and Lease Time for each

DHCP Client attached to the router (Figure 4-13):

Figure 4-13 DHCP Clients List

¾ Index - The index of the DHCP Client

¾ Client Name - The name of the DHCP client

¾ MAC Address - The MAC address of the DHCP client

¾ Assigned IP - The IP address that the router has allocated to the DHCP client.

¾ Lease Time - The time of the DHCP client leased. Before the time is up, DHCP

client will request to renew the lease automatically.

You cannot change any of the values on this page. To update this page and to show the

current attached devices, click the Refresh button.

4.5.3 Address Reservation

When you specify a reserved IP address for a PC on the LAN, that PC will always

receive the same IP address each time it accesses the DHCP server. Reserved IP

addresses should be assigned to servers that require permanent IP settings. This page

is used for address reservation (shown in

Figure 4-14).

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 61 62

No comments

Tp-link Cable/DSL Router TL-R860 User Manual Page 25