Tp-link Cable/DSL Router TL-R860 User Manual download pdf (Page 33)

TL-R860 Cable/DSL Router User Guide

- 27 -

There are two default filtering rules of IP Address Filtering, either Allow or Reny

passing through the router.

¾ Enable Domain Filtering - Set Domain Filtering as enabled or disabled.

¾ Enable MAC Filtering - Set MAC Address Filtering is enabled or disabled. You can

select the default filtering rules of MAC Address Filtering, either Allow or Reny

accessing the router.

4.7.2 IP Address Filtering

The IP Address Filtering feature allows you to control Internet Access by specific users

on your LAN based on their IP addresses. The IP Address Filtering are set on this page,

Figure 4-25:

Figure 4-25 IP Address Filtering

To disable the IP Address Filtering feature, keep the default setting, Disabled. To set up

an IP Address Filtering entry, click Enable Firewall and Enable IP Address Filtering on

the Firewall page, and click the Add New… button. The page " Add or Modify an IP

Address Filtering entry " will appear shown in

Figure 4-26:

Figure 4-26 Add or Modify an IP Address Filtering Entry

To create or modify an IP Address Filtering entry, please follow these instructions:

1. Effective Time - Enter a range of time in HHMM format, which point to the range

time for the entry to take effect. For example, 0803 - 1705, the entry will take effect

from 08:03 to 17:05.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 61 62

No comments

Tp-link Cable/DSL Router TL-R860 User Manual Page 33