TP-LINK TL-SL2210 Specifications Page 14

  • Download
  • Add to my manuals
  • Print
  • Page
    / 160
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 13
Note:
When using the SFP port with a 100Mbps module or a gigabit module, you need to configure its
corresponding Speed and Duplex mode on SwitchingPortPort Config page or through
Telnet. For 100M module, please select 100MFD while select 1000MFD for gigabit module. By
default, the Speed and Duplex mode of SFP port is 1000MFD. For TL-SL2210/TL-SL2452, the
SFP port can only be used with a gigabit module.
LEDs
Name Status Indication
On(green) The switch is powered on.
Power
Flashing/Off The switch is powered off or power supply is abnormal.
Flashing The switch is working normally.
System
On/Off
The switch is powered off or the switch is working
abnormally.
On A device is linked to the corresponding port.
Flashing Data is being transmitted or received.
Green The linked device is running at 100Mbps.
10/100M
(10/100Mbps)
Yellow The linked device is running at 10Mbps.
On A device is linked to the corresponding port.
Flashing Data is being transmitted or received.
Green The linked device is running at 1000Mbps.
1000M
(1000Mbps)
Yellow The linked device is running at 10/100Mbps.
2.3.2 Rear Panel
The rear panel of TL-SL2210/TL-SL2218/TL-SL2428/TL-SL2452 features a power socket and a
Grounding Terminal (marked with
).
The rear panel of TL-SL2210 is shown as the following figure.
Figure 2-5 Rear Panel of TL-SL2210
The rear panel of TL-SL2218 is shown as the following figure.
Figure 2-6 Rear Panel of TL-SL2218
7
Page view 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 159 160

Comments to this Manuals

No comments