TP-LINK TL-WR641G User Manual download pdf (Page 10)

TL-WR641G 108M Wireless Router User Guide

 Built-in NAT and DHCP server supporting static IP address distributing

 Supports Virtual Server, Port Triggering, and DMZ host

 Built-in firewall supporting IP address filtering, Domain Name filtering, and MAC

address filtering

 Supports TCP/IP, PPPoE, DHCP, ICMP, NAT

 Supports UPnP, Dynamic DNS, Static Routing, VPN pass-through

 Supports Traffic Stat.

 Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter

 Ignores Ping packets from WAN or LAN ports

 Supports firmware upgrade

 Supports Remote and Web management

2.3 Panel Layout

2.3.1 The Front Panel

The front panel of the TL-WR641G consists of several LED indicators, which is designed

to indicate connections. Viewed from left to right. Table 2-1 describes the LEDs on the

front panel of the router.

Figure 2-1 Front Panel sketch

Name Action Description

Not lit No Power

Power

Lit up Power on

Lit up

The router is initialising

Flashing The router is working properly

System

Not lit The router has a hardware error

Not lit

There is no device linked to the corresponding port

Lit up

There is a device linked to the corresponding port but

no activity

Link/Act

Flashing

There is an active device linked to the corresponding

port

Not lit The Wireless Radio function is disabled

WLAN

Flashing The Wireless Radio function is enabled

Table 2-1 The LEDs description

2.3.2 The Rear Panel

The rear panel contains the following features. (Viewed from left to right:)

 Wireless antenna

 Factory Default Reset button

- 4 -

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 66 67

Comments to this Manuals

No comments

TP-LINK TL-WR641G User Manual Page 10

Comments to this Manuals

Related products and manuals for WLAN access points TP-LINK TL-WR641G